While researching this make and model of practice pad, I was also looking for an older version of the pad so I could get a better idea of its technical development.
I got lucky and obtained two within days of each other. They were made around the same time, in the early to mid 1960s (not long after its release by Remo).
The larger of the two pads measures 8” diameter and is constructed with a wood bed covered by a metal rim. Inside the wood bed is a foam muffler covered with a real, tunable Weather King drum head. Below all of this is a Masonite platform that is tilted slightly to give a simulation of the tilt most drummers used in the 1960s; before the advent of modern marching drum carriers, snare drums were carried on the march with a simple webbed cotton sling and a leg rest, which caused the drum to tilt. (This historic “tilt” is why snare drummers have been using what we call “traditional” grip for centuries. Only when drums could be carried perfectly horizontal could drummers begin utilizing “matched” grip comfortably. Oddly, while most drum lines carry drums nearly horizontally now, most use traditional grip, which can place extra strain on the left hand as it’s require to twist farther away to pull the stick from the drum head. But I digress.)
Photos below show the construction of the older, 8” Remo pad.
The other pad was a gift from a fellow drummer back East, who offered to give it to me if I paid for postage. It’s a smaller, 6” diameter pad, with a large Masonite platform designed to allow the snare to be placed on top of a 14” snare drum — a throwback to the rubber pads designed by Billy Gladstone over a decade earlier, which serve as a muffler for the drum while practicing. Since this pad is not especially low-volume, putting it on a drum won’t create quite the same muffled effect; but perhaps some drummers found this feature useful. The 14” Masonite disc was offered as an optional accessory, sold separately and screwing into the threaded hole originally designed to mount the smaller pad on a cymbal stand. My disc came with some damage incurred in shipping, so I fashioned a small “washer” from cardboard that allowed me to re-center the disc under the pad. The cardboard is just stiff enough without adding additional pressure to the fragile, 60-year-old Masonite disc.
Pay close attention to these photos, because there will be another part to this exploration that will show off what I believe was the precursor to the tuneable pad, you’ll be able to see the differences in design that may have led Remo to his idea of a tuneable pad. (No spoilers if you think you know where I’m going with this; I’m waiting to hear back from folks at Remo for verification.)
Below, you’ll find videos comparing the 1960s version of the pad with my plastic-topped pad from the 1970s. While the 1970s pad feels familiar, I find I actually like playing the 60s pad a little more. The sound and response feel "beefier" to me, and I don't think it's only about the size difference, but the materials used as well. My guess is that plastic got less expensive to manufacture with and that helped fuel the switch from a wood and metal base to an all-plastic one.
I think the Remo tuneable pad still has a place in the drum universe; For untold millions of drummers it has been the gateway to sa lifetime of drumming joy. It remains a well-built and very affordable choice for students, and the replaceable head makes it a longer-lasting choice too.
I hope you've enjoyed this little trip down the Remo drum pad "rabbit hole," and don't forget there will be a third chapter to this exploration.
Happy drumming!
No comments:
Post a Comment